Radio Control Dragsters
RC Dragsters Home of the RC Dragster Kit Nitro Dragsters About Nitro Dragsters Ordering RC Dragster Parts Ordering RC Dragsters Ordering RC Dragsters Images of RC Dragsters Images of RC Dragsters RC Dragster Setups RC Dragster Setups Custom RC Dragsters All about RC Dragsters
Nitro RC Dragster Parts

Links

R/C Car Parts and Accessories
R/C Accessories








Designed by: Maurice Naragon / webscience.com


Aftershock Doorslammer Kits

The Aftershock is also available as a “doorslammer!” Grand Motorsports’ Aftershock Pro-Stock / Pro Mod kits are the most adjustable, complete competition-level nitro drag kits available today, and include many high-end features as standard equipment:

  • Center-weighted engine / two-speed location for optimum chassis balance
  • Modular all-Aluminum / Graphite chassis construction.
  • Easily Adjustable belt tension
  • Graphite Vented Brake Disc
  • Aluminum front 18T pulley/Composite rear 40T pulley
  • Choice of Titanium 6mm 2-speed shaft / single-speed 5mm shaft w/44T spur gear
  • Adjustable rear axle ride height
  • Several choices of GMS or RAE bodies as they become available
  • Graphite rear body mount “struts”
  • Composite 2” front Wheels
  • One Ounce Fuel Tank
  • TM 1.5” wide, 3.25” tall Nitro Foams
  • Complete detailed Instructions

Wheelbase
10.5" to 11.6” Wheelbase (adjustable)
Rear Track Width
5.00 inches
Front Track Width
4.35 inches
Rolling Chassis (kit components) weight:
17.4 oz.


#4205 (w/5mm Shaft, single speed spur gear)
#4206 (w/titanium 6mm 2-Speed shaft)

List $779
Online Price $479

Go To Order Page

GMS 11 Kit
New GMS 11 Kit includes a super light chassis that incorporates a brace designed to provide a strong platform at a reduced total weight. The kit includes super-light hollow front axle, rear axle, lightweight steering components, and lightweight rear hubs that help keep rotating mass to a minimum. The aluminum motor plates and top plate were designed to allow the racer to remove the motor in seconds. Completing this kit are super strong front 2.0"rims, rear 1/10 scale foam tires, bearings (front and rear), body posts, hardware, and full instructions.

Wheelbase
11 inches
Number of cells
2 to 4 LiPo cells
Weight (rolling chassis minus body and electronics)
7.5 oz.
Front rims
2.0 inch diameter with o-rings
Rear tires
2.5 inch diameter soft foam mounted on 10th scale rims
Chassis material
.093 inch graphite weave with center brace
Body
Chassis will accept many styles and types of bodies. Kit does include the Pro Stock body
Track width
5.0 F / 6.0 R inches
Aluminum parts
6061 blue anodized aluminum
Rear Suspension
Solid, no T-Bar

GMS 11 Kit #1800
(includes ProStock body)

List $319
Online price $225

Go To Order Page